Escort ZX2 L4-2.0L DOHC VIN 3 (2000)
1. Attach a rubber drain hose to the front disc brake caliper bleeder screw and submerge the free end of the hose in a container partially filled with
clean brake fluid.
2. Have an assistant pump the brake pedal 10 times and then hold firm pressure on the brake pedal.
3. CAUTION: Be sure to check the brake fluid level in the brake master cylinder reservoir often. Do not let it run dry.
Loosen the front disc brake caliper bleeder screw until a stream of brake fluid comes out. Have an assistant maintain pressure on the brake pedal
while tightening the front disc brake caliper bleeder screw.
1
Repeat until clear, bubble-free fluid flows.
4. Tighten the front disc brake caliper bleeder screw.
Manual Bleed - Wheel Cylinder Only