ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Hydraulic Control Assembly - Antilock Brakes > < Exhaust Brake Control Valve - Without ABS
Page 1
background image

Brake Proportioning/Combination Valve: Service and Repair
Exhaust Brake Control Valve - With ABS

Removal 

1. WARNING:  Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If

brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally,
drink water and induce vomiting. Get medical attention immediately.
 

CAUTION:  Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it
with water.

Remove the brake pressure control valves.
1

Disconnect the two brake line fittings and plug.

2

Remove the brake pressure control valves.

Installation 

1. To install, reverse the removal procedure.

Bleed the brake system.

Hydraulic Control Assembly - Antilock Brakes > < Exhaust Brake Control Valve - Without ABS