ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Evaporator Case|Locations|Page 6335 > < Evaporator Case|Locations
Page 1
background image

Evaporator Case: Service and Repair

REMOVAL

NOTE:

-

Installation of a new suction accumulator/drier is not required when repairing the air conditioning system except when there is physical evidence of
system contamination from a failed A/C component or damage to the suction accumulator/drier.

-

If the A/C evaporator core leak is suspected, the A/C condenser core must be leak tested before it is removed from the vehicle.

-

The A/C evaporator core is not serviced separately from the A/C evaporator housing. If the A/C evaporator core needs to be serviced, install a new
A/C evaporator housing as an assembly.

1. Disconnect the battery.
2. Perform the Refrigerant Discharging and Recovery Procedure.

3. Disconnect the A/C vacuum line.

CAUTION:  Plug all ports to prevent contamination from dirt and moisture.

4. Disconnect the rear condenser to evaporator line spring lock coupling.

CAUTION:  Plug all ports to prevent contamination from dirt or moisture.

5. Remove the suction line support clip retaining nuts.

Evaporator Case|Locations|Page 6335 > < Evaporator Case|Locations