ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Line - Condenser to Evaporator, Front|Page 6416 > < Hose/Line HVAC|Specifications|Page 6413
Page 1
background image

Hose/Line HVAC: Service and Repair
Line - Condenser to Evaporator, Front

REMOVAL

1. Perform the Refrigerant Discharging and Recovery Procedure.
2. Remove the A/C pressure cut-off switch. For additional information, refer to A/C Pressure Switch.

3. Remove the condenser to evaporator line support clip retaining bolt.

4. Disconnect the rear condenser to evaporator line spring lock coupling.

CAUTION:  Plug all ports to prevent contamination from dirt or moisture.

5. Disconnect the front condenser to evaporator line spring lock coupling.

CAUTION:  Plug all ports to prevent contamination from dirt or moisture.

INSTALLATION

Line - Condenser to Evaporator, Front|Page 6416 > < Hose/Line HVAC|Specifications|Page 6413