ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 1623 > < With A/C|Page 1620
Page 1
background image

Drive Belt: Initial Inspection and Diagnostic Overview

1. Verify the customer's concern by operating the engine to duplicate the condition.

Visual Inspection Chart

2. Inspect to determine if any of the following mechanical concerns apply:

3. Note:  Minor cracks in the V-grooved portion of the drive belt are considered normal and acceptable. If the drive belt has chunks missing from the

ribs, a new drive belt should be installed.

Install a new drive belt if any of the following conditions exist: rib chunk-out, severe glazing, frayed cords or other concerns.
Inspect for drive belt cracking/chunking/wear.

V-Ribbed Serpentine Drive Belt With Cracks Across Ribs

V-Ribbed Serpentine Drive Belt With Chunks of Rib Missing

4. If the concerns remain after inspection, determine the symptoms and go to the symptom chart.  See: Symptom Related Diagnostic Procedures

Initial Inspection and Diagnostic Overview|Page 1623 > < With A/C|Page 1620