ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3355 > < Initial Inspection and Diagnostic Overview|Page 3353
Page 1
background image

Information Bus: Service and Repair

COMMUNICATIONS NETWORK WIRING REPAIR

Heat Gun

SPECIAL TOOL(S)

1. Disconnect the battery ground cable. For additional information, refer to Battery.

2. Strip the wires.

3. Solder the wires.

1

Install the heat shrink tube.

2

Twist the wires together.

3

Solder the wires together.

NOTE:  Use Rosin Core Mildly Activated (RMA) solder, not acid core solder.

Initial Inspection and Diagnostic Overview|Page 3355 > < Initial Inspection and Diagnostic Overview|Page 3353