ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Evaporative Emission Control Canister|Description and Operation|Page 3858 > < Evaporative Emission Control Canister|Description and Operation|Page 3856
Page 1
background image

Evaporative Emission Control Canister: Service and Repair

REMOVAL

1. Disconnect the battery ground cable. For additional information, refer to Battery.

WARNING:  THE EVAPORATIVE EMISSION SYSTEM CONTAINS FUEL VAPOR AND CONDENSED FUEL VAPOR.
ALTHOUGH NOT PRESENT IN LARGE QUANTITIES, IT STILL PRESENTS THE DANGER OF EXPLOSION OR FIRE.
DISCONNECT THE BATTERY GROUND CABLE FROM THE BATTERY TO MINIMIZE THE POSSIBILITY OF AN
ELECTRICAL SPARK OCCURRING, POSSIBLY CAUSING A FIRE OR EXPLOSION IF FUEL VAPOR OR FUEL LIQUID IS
PRESENT IN THE AREA. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN PERSONAL INJURY.

2. Raise and support the vehicle. For additional information, refer to Maintenance/Service and Repair.

3. Disconnect the evaporative canister tube and EVAP canister purge outlet tube.

CAUTION:  Care must be taken to avoid damaging the canister vent solenoid.

4. Disconnect the canister vent solenoid electrical connector.

5. Remove the EVAP canister and bracket assembly.

Evaporative Emission Control Canister|Description and Operation|Page 3858 > < Evaporative Emission Control Canister|Description and Operation|Page 3856