ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Fuel Pump Driver Module (FPDM)|Page 4249 > < Electronic Engine Controls|Page 4246
Page 1
background image

Fuel Pump Control Unit: Service and Repair
Fuel Pump Driver Module (FPDM)

REMOVAL

NOTE:  The FPDM is located inside the vehicle behind the LH rear wheel housing.

1. Disconnect the battery ground cable.
2. Remove the LH rear interior trim panel.

3. Disconnect wiring harness from fuel pump driver module.
4. Remove the nuts and the fuel pump driver module.

INSTALLATION

1. Follow the removal procedure in reverse order.

Fuel Pump Driver Module (FPDM)|Page 4249 > < Electronic Engine Controls|Page 4246