Escort ZX2 L4-2.0L DOHC VIN 3 (2000)
Throttle Cable/Linkage: Service and Repair
Cable Bracket
REMOVAL
1. Disconnect the accelerator cable from the throttle control lever and the accelerator cable bracket.
1
Disconnect the cable housing from the accelerator cable bracket.
2
Disconnect the accelerator cable end from the throttle control lever.
3
Position the accelerator cable aside.
2. Disconnect the speed control cable from the throttle control lever and the accelerator cable bracket.
1
Disconnect the speed control actuator cable from the throttle control lever.
2
Disengage the speed control actuator cable sleeve from the retainer.
3
Remove the retainer.
3. Remove the throttle body.
4. Remove the bolts and the accelerator cable bracket.
INSTALLATION