Escort ZX2 L4-2.0L DOHC VIN 3 (2000)
Remove the engine cross member.
1
Remove the bolts and nuts.
2
Remove the lower front insulator nuts.
3
Remove the lower rear insulator nuts.
4
Remove the engine support crossmember.
6. Lower the vehicle.
7. Partially lower the rear of the engine to gain access to the lower rear insulator bolt.
-
Loosen the nuts on Three-Bar Engine Support.
8. Raise the vehicle.
9. Remove the lower rear support insulator.
1
Remove the nut and the bolt.
2
Remove the lower rear support insulator.
Installation