Escort ZX2 L4-2.0L DOHC VIN 3 (2000)
4. Remove the windshield outside moulding from the windshield glass.
^
Twist and pull to remove.
5. Using a soft brush or vacuum, remove any dirt and foreign material from the pinch weld.
6. Using the special tool, start at the top center of the windshield and cut the sealant away from the glass working down the sides.
CAUTION: Do not scratch the pinch weld area.
NOTE: Lubricate the existing urethane sealant where it meets the glass with water to aid the special tool when cutting the urethane sealant.
7. Using the special tool, distance the windshield glass from the body.
8. Using the special tool, cut the remaining urethane sealant and remove the windshield.
9. Using a soft brush or vacuum, remove any dirt and foreign material from the pinch weld.
INSTALLATION
CAUTION: After installing the urethane-installed glass, the vehicle should not be driven until the urethane has cured. The curing time at 21 °C (70°F)
and 50% relative humidity is 24 hours (decreasing at higher temperatures and higher humidities). Refer to the detailed instructions provided by the
manufacturer in the kit Inadequate curing of the urethane may adversely affect the strength of the urethane adhesive bond.