Excursion 2WD V10-6.8L VIN Z CNG (2003)
![background image](/ford/excursion_2wd/v10-6.8l_vin_z_cng/Page-2644001.png)
Rear Door Interior Handle: Service and Repair
Crew Cab
INTERIOR DOOR HANDLE - CREW CAB
REMOVAL
1. Remove the rear door trim panel.
2. Position the watershield aside.
3. Release the interior rear door handle cover.
-
Release the clips.
4. Remove the inside door handle.
1
Remove the nuts.
2
Remove the inside door handle.
INSTALLATION
1. NOTE: If a new component is to be installed, refer to the Ford Master Parts Catalog for specific part information.
To install, reverse the removal procedure.