Excursion 2WD V10-6.8L VIN Z CNG (2003)
![background image](/ford/excursion_2wd/v10-6.8l_vin_z_cng/Page-2683002.png)
1. Remove and discard the nut and bolt
-
During installation, install a new bolt and nut.
2. Remove the lower mount.
3. NOTE: No lubricants of any kind are to be used during body insulator installation.
To install, reverse the removal procedure.
Body Support - Front Lower
BODY SUPPORT-FRONT LOWER
Removal
1. Remove the scuff plate.
2. Remove the cowl side trim panel.
3. Pull the carpet or mat back to see the front body insulator plug button.