Excursion 2WD V10-6.8L VIN Z CNG (2003)
Headliner: Service and Repair
HEADLINER
Torx Bit, Safety Belt Bolt
SPECIAL TOOL(S)
REMOVAL
1. NOTE: Overhead console with front auxiliary controls shown, all others similar.
Remove the overhead console.
-
Remove the screw, disengage the clips, and disconnect the electrical connectors.
2. If equipped, remove the auxiliary climate control assembly.
1
Pull down on the front of the auxiliary climate control assembly and slide forward and downward.
2
Disconnect the electrical connectors.
3. If equipped, remove the video display unit.
4. Remove the left and right visors.