Excursion 2WD V10-6.8L VIN Z CNG (2003)
![background image](/ford/excursion_2wd/v10-6.8l_vin_z_cng/Page-2780011.png)
2. Remove the seat bottom cover.
1
Remove the four pin-type retainers.
2
Release the eight J-clips.
3. Remove the seat cushion trim cover and foam pad from the seat cushion frame.
-
Unhook the J-clips.
4. Position the upholstery back and remove the hog rings.
5. Remove the seat cushion trim cover from the seat cushion foam pad.
6. Remove the safety belts.
-
Using the special tool, remove the two bolts.