Excursion 2WD V10-6.8L VIN Z CNG (2003)
7. Tighten the spindle nut while rotating the disc brake hub and rotor.
8. Loosen the spindle nut.
9. Tighten the spindle nut while rotating the disc brake hub and rotor.
10. Install the following components:
1. Install the nut retainer.
2. Install the cotter pin.
3. Install the hub grease cap.
11. Install the disc brake caliper anchor plate.
Brake Disc Shield
Brake Disc Shield-F-250, F-350 4x2
Removal and Installation