Excursion 2WD V10-6.8L VIN Z CNG (2003)
Wheel Speed Sensor: Service and Repair
Sensor Ring, Front
Front Wheel Speed Sensor Ring 4x2
Special Tools)
Removal
1. Remove the front disc brake rotor.
2. CAUTION: Discard the front brake anti-lock sensor indicator.
Use the special tools to remove the front brake anti-lock sensor indicator.
Installation
1. CAUTION: The front brake anti-lock sensor indicator must be pressed on straight.
Use an appropriate size cylinder and press to install the front brake anti-lock sensor indicator.
2. Install the from disc brake rotor.