Excursion 2WD V10-6.8L VIN Z CNG (2003)
![background image](/ford/excursion_2wd/v10-6.8l_vin_z_cng/Page-2425003.png)
4. Remove the safety belt tongue.
1
Remove the safety belt nut.
2
Remove the safety belt.
INSTALLATION
NOTE:
^
Make sure the safety belt webbing is not twisted prior to installation.
^
Make sure to tighten nuts to specification.
1. Install the safety belt.
1
Position the safety belt anchor.
2
Position the safety belt in the retaining straps. Install the nut.
2. Install the safety belt buckle.
1
Position the safety belt buckle.
2
Make sure the safety belt buckle is positioned in the retaining strap.
3
Install the safety belt buckle nut.
3. Check the active restraint system for correct operation.
Second Row, Inboard