Excursion 2WD V10-6.8L VIN Z CNG (2003)
![background image](/ford/excursion_2wd/v10-6.8l_vin_z_cng/Page-1621002.png)
5. Using the special tool, disconnect the fluid cooler tubes from the fluid cooler.
6. CAUTION: Do not attempt to backflush and clean the OTA transmission fluid cooler. Install a new OTA transmission fluid cooler as part of a
transmission overhaul or exchange. Failure to follow these directions can result in transmission damage.
Remove the remaining bolts and OTA transmission fluid cooler
Installation
1. CAUTION: Do not attempt to backflush and clean the OTA transmission fluid cooler. Install a new OTA transmission fluid cooler as part of a
transmission overhaul or exchange. Failure to follow these directions can result in transmission damage.
Install the OTA transmission fluid cooler.
1
Position the fluid cooler in the vehicle.
2
Install the lower bolts.
3
Connect the fluid cooler tubes to the fluid cooler hoses.