Excursion 2WD V10-6.8L VIN Z CNG (2003)
![background image](/ford/excursion_2wd/v10-6.8l_vin_z_cng/Page-1649008.png)
8. Install the main control valve body.
1
Install the main control valve body.
2
Aligning the manual shift valve with the manual valve detent lever.
3
Install the nuts finger-tight.
4
Install the bolts finger-tight.
9. If previously installed, remove, then reinstall the bolt into the separator plate reinforcing plate.
1
Remove the bolt.
2
Install the bolt.