Excursion 2WD V10-6.8L VIN Z CNG (2003)
![background image](/ford/excursion_2wd/v10-6.8l_vin_z_cng/Page-1710010.png)
10. NOTE: Inspect the transmission, transfer case and axle seals for damage. Install new components as necessary.
NOTE: Lubricate the slip yoke spline with grease.
NOTE: Install the driveshaft so that the index marks made before removal.
NOTE: Install new bolts and retainers.
NOTE: Bolt direction is vehicle application dependent.
To install, reverse the removal procedure.
Driveshaft-Rear, Three-Piece
Driveshaft-Rear, Three-Piece
Removal
1. Raise and support the vehicle.