Excursion 2WD V10-6.8L VIN Z CNG (2003)
![background image](/ford/excursion_2wd/v10-6.8l_vin_z_cng/Page-1740003.png)
2. Position the air deflector and install the bolts.
3. Position the skid plate and install the bolts (4x4 only).
4. Lower the vehicle.
5. Install the upper bolts by inserting a long extension and socket through the front grille and bumper.
6. CAUTION: Do not use any fluid approved for MERCON V application. Using a fluid rated for MERCON V can cause internal damage in
"MERCON only" applications.
Fill the transmission with the specified type and quantity of transmission fluid.
7. Check for leaks.
TorqShift
Auxiliary Transmission Fluid Cooler -Oil-to-Air Fluid Cooler, TorqShift
Removal