Excursion 2WD V8-6.0L DSL Turbo (2003)
5. Disconnect the condenser to evaporator line from the A/C evaporator core.
6. Remove the eight pin-type retainers and the sight shield.
7. Disconnect the condenser-to-evaporator line from the A/C condenser core and remove the line.
INSTALLATION
1. To install, reverse the removal procedure.
^
Lubricate the O-ring seals with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or equivalent
meeting Ford specification WSH-M1C231-B.
Condenser To Evaporator Line - Without Aux Climate Control
REMOVAL
1. Recover the refrigerant. Refer to: Heating and Air Conditioning, Service and Repair, Refrigerant Discharging and Recovery Procedure,
See: Service and Repair/Refrigerant Discharging and Recovery Procedure