Excursion 4WD V10-6.8L (2002)
17. Remove the third row shoulder safety belt guides.
^
Pull back the shoulder safety belt guide covers and remove the bolts.
CAUTION: If the safety belt retractor is to be reused, do not allow the safety belt to be retracted all the way into the retractor. Doing so may
cause the retractor to lock and not release the safety belt.
NOTE: Inspect the shoulder safety belt guide and cover for damage. If the shoulder safety belt guide or cover is damaged or cover does not
remain closed, install a new shoulder safety belt guide.
18. Pull to release the retaining clips and remove the C-pillar trim panels.
19. Remove the third row seat.
20. Pull down to release the clips and remove the rear hatch upper trim panel.
21. Pull out to release the clips and remove the D-pillar trim panels.