Excursion 4WD V10-6.8L (2002)
Trim Panel: Service and Repair
Back Panel Trim Cover
Crew Cab
REMOVAL
1. Remove the child safety seat tether anchor.
2. Remove the left and right rear corner trim panels.
3. Remove the four pin-type retainers.
4. Remove the back panel trim cover.
INSTALLATION
1. To install, reverse the removal procedure.
Regular Cab
REMOVAL
1. If equipped, remove the utility tray(s).
2. Remove the left and right rear corner trim panels.
3. Remove the four pushpins.
4. Remove the trim cover.
INSTALLATION
1. To install, reverse the removal procedure.