Excursion 4WD V10-6.8L (2002)
1. Release the tension on the push nuts to allow the cushion studs to move freely.
2. Position the seat cushion to the seat riser, then loosely install the nuts.
3. Align the cushion frame to the bumper pins.
NOTE: Make sure the bumper pins are centered in the holes of the cushion frame.
4. Tighten the nuts.
NOTE: Make sure the seat cushion is closed and positioned as if it were installed.
5. Check the seat cushion latch for correct operation.
6. Install the seat.
Seat Cushion Release, Second Row, 60 Percent