ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Engine, Cooling and Exhaust > < Recall - Lug Nut Procedure and Torque Specification|Page 2553
Page 2
background image

Rear Lifting Points

Lifting Points

WARNING:
^

IF EQUIPPED, THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT DOWN PRIOR TO
HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF
THE AIR SUSPENSION SWITCH LOCATED BELOW THE GLOVE BOX IN THE LOWER RIGHT OF THE FRONT
PASSENGER FOOTWELL. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE
AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

^

WHEN RAISING A VEHICLE ON A TWIN-POST HOIST, USE EXTREME CARE POSITIONING THE HOISTING FORKS TO
AVOID INTERFERENCE WITH THE PLASTIC MIDSHIP FUEL TANK.

CAUTION:
^

When raising a vehicle on a twin-post hoist, use care when positioning the vehicle so that the hoisting forks do not interfere with the shock
absorber mounting brackets or stabilizer mounting brackets, if so equipped, or damage the axle carrier or rear cover.

^

Damage to suspension, exhaust and steering linkage components can occur if care is not exercised when positioning the hoist adapters prior to
lifting the vehicle.

Hoist adapters for heavy-duty hoists must be positioned according to the hoist manufacturer's recommendations. Make sure the hoist has an
adequate lifting capacity for the vehicle being lifted.

Engine, Cooling and Exhaust > < Recall - Lug Nut Procedure and Torque Specification|Page 2553