Excursion 4WD V10-6.8L (2002)
![background image](/ford/excursion_4wd/v10-6.8l/Page-327001.png)
Electronic Brake Control Module: Service and Repair
Anti-Lock Brake System (ABS) Module - Anti-Lock Brake Control
Removal and Installation
1. CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
Disconnect the battery ground cable.
2. Disconnect the anti-lock brake control module electrical connector.
3. Disconnect the pump motor electrical connector from the anti-lock brake control module.
4. Remove the screws and the anti-lock brake control module.
5. To install, reverse the removal procedure.