Excursion 4WD V10-6.8L (2002)
2. Pull out to release the retaining clips and remove the restraint control module (RCM) cover.
NOTE: The RCM is mounted on the center tunnel under the instrument panel.
3. Disconnect the restraint control module RCM.
1
Disconnect the RCM electrical connector locking clip.
2
Disconnect the RCM electrical connector.
3
Remove the RCM retaining screw.
4. Remove the RCM module.
1
Remove the RCM retaining screws.
2
Remove the RCM module.
INSTALLATION
WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, CAUTIONS AND
NOTES AT THE BEGINNING OF THE REMOVAL PROCEDURE.