Excursion 4WD V10-6.8L (2002)
DEACTIVATION/REACTIVATION PROCEDURE. Refer to Air Bag(s) Arming and Disarming.
2. Remove the driver air bag module.
1
Remove the two steering wheel back cover plugs.
2
Remove the two driver air bag module bolts.
3
Disconnect the horn electrical connector.
4
Disconnect the clockspring electrical connector.
5
Remove the driver air bag module.
NOTE: Make sure the wheels are in the straight-ahead position.
3. Remove the steering wheel.
NOTE: Make sure the wheels are in the straight-ahead position.
4. Apply two strips of masking tape across the clockspring to prevent accidental rotation.
5. Twist the tilt wheel handle and shank and remove.