Excursion 4WD V10-6.8L (2002)
4. Remove the safety belt shoulder height adjuster cover pin-type retainer.
5. Remove the safety belt shoulder height adjuster.
1
Position the safety belt shoulder height adjuster cover down.
2
Remove the bolt.
3
Remove the safety belt shoulder height adjuster.
6. Remove the bolt and position the safety belt retractor pretensioner to the side.
7. Remove the bolt and the safety belt anchor.
^
Remove the safety belt retractor pretensioner.
NOTE: For pretensioner retractor disposal procedure, refer to Air Bag Systems.
CrewCab and Excursion drivers side