Excursion 4WD V10-6.8L (2002)
![background image](/ford/excursion_4wd/v10-6.8l/Page-2271002.png)
5. Remove the pinch bolt.
-
Turn the steering wheel as necessary to access the bolt.
-
Make sure the steering column is locked.
6. CAUTION: During installation, do not overtighten the fittings.
Disconnect the lines.
7. Raise the vehicle.
8. Remove the cotter pin and nut.
-
Discard the cotter pin.
9. Using the special tool, disconnect the drag link.