Excursion 4WD V10-6.8L (2002)
3. Tighten the transmission support crossmember nuts and bolts (LH side) to specification.
4. NOTE: Be sure to install the transmission crossmember gusset to transmission crossmember bolts as shown to avoid interference with the
exhaust.
Loosely install the nuts and bolts retaining the transmission crossmember gusset to the transmission support crossmember.
5. Loosely install the nuts and bolts retaining the transmission crossmember gusset to the frame.
6. Tighten the nuts and bolts retaining the transmission crossmember gusset to the frame to specification.