Excursion 4WD V10-6.8L (2002)
Pressure Plate: Service and Repair
Manual Transaxle/Transmission and Clutch-General Information
Clutch Pressure Plate Locating Dowels
Removal
1. CAUTION: Do not damage the bore or the surrounding surface area.
When installed in an open hole, use a drift to remove the dowel. When installed in a blind hole, use locking pliers to remove the dowel.
-
There are two dowels on the diesel engine flywheel, and three dowels on the gasoline engine flywheel.
Installation
1. CAUTION: Do not damage the bore or the surrounding surface area.
Using a brass or plastic mallet, drive the dowels squarely into place until fully seated in the bore.