Excursion 4WD V10-6.8L VIN S (2000)
Rear Door Panel: Service and Repair
Crew Cab
TRIM PANEL-REAR DOOR, CREWCAB
Removal
1. Remove the window regulator switch housing (14527).
2. If equipped, remove the window regulator handle (23342).
3. If equipped, disconnect the power window connector.
4. Remove the panel reflector.
5. Remove the screws.
6. NOTE: Remove the rear door trim panel by pulling it straight upward.
Lift and remove the rear door trim panel.
Installation
1. CAUTION: Insert the lower panel tabs first or they can break when installing the rear door trim panel.
Follow the removal procedure in reverse order.
