Excursion 4WD V10-6.8L VIN S (2000)
![background image](/ford/excursion_4wd/v10-6.8l_vin_s/Page-2728003.png)
4. Remove the button.
5. Remove and discard the bolt.
6. Remove the insulator.
Installation
NOTE: Do not reuse body support mounting fasteners. New fasteners must be installed for each fastener that has been removed or loosened.
1. NOTE: No lubricants of any kind are to be used during body insulator installation.
Follow the removal procedure in reverse order.
Body Support - Front Upper
BODY SUPPORT-FRONT UPPER
Removal