Excursion 4WD V10-6.8L VIN S (2000)
![background image](/ford/excursion_4wd/v10-6.8l_vin_s/Page-2811004.png)
4. Position the upholstery and pad, then remove the bolts.
INSTALLATION
1. To install, reverse the removal procedure.
2. Check the restraint system for correct operation.
Second Row, Right Side
REMOVAL
1. Remove the seat. For additional information, refer to Seat-Excursion, Second Row.
2. Remove the seat backrest. For additional information, refer to Rear Seat Backrest-Excursion Second Row, 60/40.
3. Unclip the J-clips and position upholstery to gain access to the seat backrest linkage rod.
4. Remove the spring pin and screw.
5. Slide the linkage toward the inboard side of the seat.