Excursion 4WD V10-6.8L VIN S (2000)
![background image](/ford/excursion_4wd/v10-6.8l_vin_s/Page-1992003.png)
4. Install the snap ring.
1
Depress the primary piston.
2
Install the snap ring.
5. If so equipped, install the brake pressure switch.
6. Install the brake master cylinder.
4. Install the snap ring.
1
Depress the primary piston.
2
Install the snap ring.
5. If so equipped, install the brake pressure switch.
6. Install the brake master cylinder.