Excursion 4WD V10-6.8L VIN S (2000)
then remove the knob. (Figures 1 and 2)
5.
For vehicles without fog lamps, position the headlamp knob in the On position.
CAUTION
TO AVOID POSSIBLE DAMAGE TO THE HEADLAMP SWITCH BEZEL, USE A PIECE OF CARDBOARD, OR SIMILAR MATERIAL,
PLACED BETWEEN THE BEZEL AND TOOL.
6.
Insert a pocket screwdriver, or similar tool, directly beneath the knob handle, between the knob face and the assembly fascia. Gently and steadily
leverage the screwdriver so that the stem tab will unlatch from the knob retaining window.
7.
Position the replacement knob on the switch assembly and push in until a click is heard and/or felt.
8.
Lightly pull the knob to make sure it is securely locked in position.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
OPERATION
DESCRIPTION
TIME
060306A
2000 Excursion: Replace
0.2 Hr.
The Headlamp Switch
Knob
DEALER CODING
CONDITION
BASIC PART NO.
CODE
11654
01
Disclaimer