Excursion 4WD V10-6.8L VIN S (2000)
6. Install two new U-bolts and four new nuts.
7. Remove the support from the axle.
8. Lower the vehicle.
Lean Correction - Motorhome
Lean Correction - Motorhome
1. CAUTION: Corrections should not be attempted on vehicles with a bumper-to-ground height right-to-left variation of 25.4 mm (1 inch) or less.
Corrections should not be made if the ride height variation is 12.7 mm (1/2 inch or less).
Raise and support the vehicle.
2. Position a separate support for the front axle.
3. Raise the front axle to relieve front spring tension.
4. Remove the nuts, U-bolts and upper spacer. Discard the nuts and U-bolts.