Excursion 4WD V10-6.8L VIN S (2000)
![background image](/ford/excursion_4wd/v10-6.8l_vin_s/Page-735009.png)
9. Install the vacuum reservoir retaining nuts.
10. Install the fender splash shield fasteners, four screws, three bolts, and three pin-type retainers.
11. Install both RH wheels.
12. Lower the vehicle.
13. Evacuate, leak test and charge the A/C system. Refer to: Heating and Air Conditioning, Service and Repair, Evacuation and Charging
Procedure, See: Heating and Air Conditioning/Service and Repair/Evacuation and Charging Procedure