Excursion 4WD V10-6.8L VIN S (2000)
![background image](/ford/excursion_4wd/v10-6.8l_vin_s/Page-2553005.png)
1. Follow the removal procedure in reverse order.
NOTE:
^
Make sure the safety belt webbing is not twisted prior to installation.
^
Make sure to tighten nuts and bolts to specification.
2. Check the restraint system for correct operation.
Second Row
Safety Belt Bolt Bit
SPECIAL SERVICE TOOL(S)
REMOVAL
NOTE: New safety belt buckles, height adjusters, center adjust tongues and belts and retractors can be installed separately. However, if a safety belt