Excursion 4WD V10-6.8L VIN S (2000)
1. Remove the shoulder belt guide.
1
Carefully position the shoulder belt guide cover up.
2
Remove the nut.
3
Remove the shoulder belt guide.
2. Remove the front door scuff plate, the rear door scuff plate, the rear assist handle and the B-pillar trim panel.
3. Remove the front safety belt retractor.
1
Using the special tool 501-010 (T77L-2100-A), remove the bolt.
2
Remove the front safety belt retractor.
4. Remove the front passenger side safety belt anchor.
1
Using the special tool 501-010 (T77L-2100-A), remove the bolt.
2
Remove the front safety belt anchor.
INSTALLATION