Excursion 4WD V10-6.8L VIN S (2000)
13. Remove the second row safety belt guide.
1
Remove the nut.
2
Remove the safety belt guide.
CAUTION: If the safety belt retractor is to be reused, do not allow the safety belt to be retracted all the way into the retractor. Doing so may
cause the retractor to lock and not release the safety belt.
14. Remove the third row safety belt guide.
1
Peel the safety belt guide cover down to access the bolt.
2
Using the special tool 501-010 (T77L-2100-A), remove the bolt.
3
Remove the safety belt guide.
CAUTION: If the safety belt retractor is to be reused, do not allow the safety belt to be retracted all the way into the retractor. Doing so may
cause the retractor to lock and not release the safety belt.
15. Pull to release the retaining clips and remove the C-pillar trim panel.