Excursion 4WD V10-6.8L VIN S (2000)
24. Note: The steering gear sector shaft bearing is not replaceable.
Use the Puller to remove the sector shaft seal.
Assembly
1. Lubricate the sector shaft seal bore.
-
Use Multi-Purpose Grease D0AZ-19584-AA or equivalent meeting Ford specifications ESB-M1C93-B and ESR-M1C159-A.
2. Use the Sector Shaft Seal Replacer to install the sector shaft seal.
-
Lubricate the sector shaft seal, using Multi-Purpose Grease D0AZ-19584-AA or equivalent meeting Ford specifications ESB-M1C93-B and
ESR-M1C159-A.
3. Install the spacer.