Excursion 4WD V10-6.8L VIN S (2000)
Transmission Speed Sensor: Service and Repair
Turbine Shaft Speed (TSS) Sensor and Output Shaft Speed (OSS) Sensor
REMOVAL
All vehicles
NOTE: The 4X2 application and the 4X4 application are similar.
1. With the vehicle in NEUTRAL, position on a hoist.
Excursion
2. Disconnect the wire loom from the crossmember.
3. Remove the transmission insulator-to-crossmember support nuts.
4. Attach a suitable high-lift transmission jack to the transmission.
5. Remove the crossmember bolts and the crossmember.
F-Super Duty
6. Remove the RH crossmember nuts.
7. Remove the LH crossmember nuts.