Excursion 4WD V10-6.8L VIN S (2000)
3. Assemble the differential pinion thrust washers and the differential pinion gears.
^
Lubricate with Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-B.
4. Engage the differential pinion gears opposite the differential side gears.
5. Using the special tool, install the differential bearings.
6. Rotate the differential pinion gears to align the differential pinion shaft bore.
7. CAUTION: If a new pinion shaft lock bolt is not available, use Stud and Bearing Mount EOAZ-19554-BA or equivalent meeting Ford
specification WSK-M2G349-A1 and tighten to specification.