Excursion 4WD V10-6.8L VIN S (2000)
![background image](/ford/excursion_4wd/v10-6.8l_vin_s/Page-1811001.png)
Universal Joint: Service and Repair
Universal Joint -Single Cardan
Special Tools
Disassembly
1. CAUTION: Do not clamp the driveshaft in the jaws of a vice or a similar holding fixture.
Place the driveshaft on a suitable workbench.
2. Index mark the driveshaft and driveshaft components.
3. Clamp the C-Frame and Screw in a vise.
4. Remove the snap rings.
5. Note: If the bearing cup cannot be pressed all the way out, remove it with gripping pliers.