Excursion 4WD V10-6.8L VIN S (2000)
Windshield Washer Pump: Service and Repair
REMOVAL
1. Remove the battery tray. For additional information, refer to Battery.
2. Position windshield washer fluid reservoir aside.
1
Remove the bolts.
2
Position windshield washer fluid reservoir aside.
3. Remove windshield washer fluid reservoir.
1
Disconnect the electrical connector.
2
Disconnect the windshield washer hose. (If equipped, disconnect the rear window washer hose).
WARNING: WINDSHIELD WASHER SOLUTION CONTAINS METHANOL WHICH IS POISONOUS. OBSERVE ALL
CAUTIONS AND WARNINGS INDICATED ON LABEL OF WASHER SOLUTION CONTAINER.
NOTE: Windshield washer fluid should be collected in a container after the windshield washer hose is disconnected.
3
Remove the windshield washer fluid reservoir.