EXP L4-98 1.6L SOHC Turbo VIN 8 FI (1984)
Figure 4
To service this condition, remove the heated backlight switch using Shop Manual procedure. Cut off the top locating pin as shown in Figure 4. With the
locating pin removed, the top of the switch can not be adjusted so that the rocker does not bind in the opening of the finish panel.
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION/TIME: Refer to the Labor Time Standards Manual for applicable operation and time.
DLR. CODING: Basic Part No. 19A328 Code: 36
